frsky fpv drone buyer’s guide for 2019

We spent many hours on research to finding frsky fpv drone, reading product features, product specifications for this guide. For those of you who wish to the best frsky fpv drone, you should not miss this article. frsky fpv drone coming in a variety of types but also different price range. The following is the top 10 frsky fpv drone by our suggestions:

Best frsky fpv drone

Product Features Editor's score Go to site
Frsky Hours X10S 2.4G 16CH Transmitter - Mode 2 - Carbon Fiber Frsky Hours X10S 2.4G 16CH Transmitter - Mode 2 - Carbon Fiber
Go to amazon.com
FrSky Taranis transmitter X-LITE 2.4GHz ACCST 16CH RC Transmitter Red for RC Racing Drone FPV Multicopter FrSky Taranis transmitter X-LITE 2.4GHz ACCST 16CH RC Transmitter Red for RC Racing Drone FPV Multicopter
Go to amazon.com
FrSky Apus MQ-60 V2 Micro BNF FPV Drone FrSky Apus MQ-60 V2 Micro BNF FPV Drone
Go to amazon.com
FrSky RXSR-FC Omnibus F4 V6 FPV Drone Flight Controller FrSky RXSR-FC Omnibus F4 V6 FPV Drone Flight Controller
Go to amazon.com
FrSky RXSR-FC Omnibus F4 Fireworks V2 FPV Drone Flight Controller FrSky RXSR-FC Omnibus F4 Fireworks V2 FPV Drone Flight Controller
Go to amazon.com
FrSky XSRF4O OSD Flight Controller Integrate with FrSky XSR Receiver for RC FPV Racing Drone FrSky XSRF4O OSD Flight Controller Integrate with FrSky XSR Receiver for RC FPV Racing Drone
Go to amazon.com
FrSky XSRF4PO OSD PDB Flight Controller Integrate with FrSky XSR Receiver for RC Multirotor FPV Racing Drone FrSky XSRF4PO OSD PDB Flight Controller Integrate with FrSky XSR Receiver for RC Multirotor FPV Racing Drone
Go to amazon.com
FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Black FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Black
Go to amazon.com
FrSky D4R-II 4CH 2.4Ghz ACCST FPV Receiver (w/telemetry) FrSky D4R-II 4CH 2.4Ghz ACCST FPV Receiver (w/telemetry)
Go to amazon.com
FrSky V8R7-II 2.4Ghz 7CH Receiver FrSky V8R7-II 2.4Ghz 7CH Receiver
Go to amazon.com
Related posts:

1. Frsky Hours X10S 2.4G 16CH Transmitter - Mode 2 - Carbon Fiber

Feature

Notes: The package is shipped by USPS, It will be arrived about 6-10 working days.Built-in iXJT+ module (the enhanced RF performance and the less latency)
Wireless trainer system, Support FrSky Free Link App, FrSky FrOS (Support OpenTX System).
2 internal antennas and detachable external antenna, Antenna detection and SWR warning.
Industrial LCD: 480*272 readable outdoor color screen, Built-in Li-ion battery.
MC12 Plus all CNC digital higher accuracy ten ball bearings hall sensor gimbals and extendable stick ends.

Description

Note: Not include receiver

The FrSky Horus X10 and X10S are the latest transmitters to join the FrSky family. They both carry on all of the features of their predecessor's and each model has its own unique advantages.

The X10 series carries forward all the advantages of its big brother the X12S, the X10 and X10S have the built-in iXJT+ module, detachable external antenna, and an industrial LCD screen. Comes with FrSky's own easy to use FrOS (operating system) and of course, supports OpenTX as well. The X10 series also inherits the wireless trainer system, antenna detection and SWR warning functions. Designed with 2 internal antennas to improve signal strength and improved battery life with a rechargeable Li-ion battery.

The two main differences between the X10 and X10S are the Horus X10 has M10 hall sensor gimbals with adjustable sticks. The Horus X10S is equipped with our latest and best gimbal to date, the MC12 Plus has all CNC digital higher accuracy 10 ball bearing hall sensor Gimbals than MC12 gimbal of the X12S. These gimbals offer the most precise control for your flying experience.

Built-in iXJT+ module (the enhanced RF performance and the less latency)

Wireless trainer system

Support FrSky Free Link App (Download link: )

FrSky FrOS (Support OpenTX System)

2 internal antennas and detachable external antenna

Antenna detection and SWR warning

Industrial LCD: 480*272 readable outdoor color screen

Built-in Li-ion battery

MC12 Plus all CNC digital higher accuracy ten ball bearings hall sensor gimbals and extendable stick ends

Full Weight: 1000g

Operating Voltage: DC 7.2V

Operating Temperature: -10 ~ 60

Operating Current: 350mA-7.2V

Number of channels: 16 channels (up to 32 channels)

Model Memories: 60 (unlimitedly extendable by TF card)

2. FrSky Taranis transmitter X-LITE 2.4GHz ACCST 16CH RC Transmitter Red for RC Racing Drone FPV Multicopter

Feature

Get ahead of the curve with the next game changing transmitter from FrSky, the Taranis X-Lite. This revolutionary radio blends the functionality and reliability of FrSky Transmitters with a compact Game-Style controller.The X-Lite is ergonomically designed, featuring 4 switches and 2 sliders, which means you can still fly your Fixed-wing models as well multirotors and helicopters.
Compact in size means you can take it virtually anywhere. It features a Haptic Vibration Feedback System along with the voice and sound alert warnings.The X-Lite has the smoothest control possible with the pre-installed high precision M12 Lite hall sensor gimbals. The easy to access battery bay allows for quick, worry free battery swaps.
The X-Lite runs on the familiar OpenTX software and the model memory is expandable with the addition of your own micro SD card. Like all of our new transmitters it has a wireless feature that lets you link up wirelessly to other FrSky radios for training, additionally it can link up to the FrSky FreeLink App for monitoring telemetry and configuring receivers.
Long range is an option with the support of the upcoming R9M Lite 915/868MHz module. Other features include Receiver Match, Real-Time Flight Data Logging and Super Low Latency for competitive flying. Overall this Radio has all the features of its predecessors in a smaller package at an unprecedented value.
More detail: https://www.frsky-rc.com/product/taranis-x-lite/ ; Download :https://www.frsky-rc.com/taranis-x-lite/

Description

FrSky Transmitter Taranis X-Lite Compact RC FPV Transmitter 2.4GHz ACCST 16CH Red for RC Racing Drone FPV Multicopter
Specification:

Item name: Taranis X-LITE
Number of Channels: 16 channels
Weight: 308g/ 376g (with battery)
Operating Voltage Range: 6.0 ~ 8.4V
Operating Current: [email protected]
Operating Temperature: -20 ~ 60
Backlight LCD resolution : 128*64
Model Memory: 60 models (extendible by Micro/TF card)
Features

Ergonomic and compact design
M12 Lite gimbal
-High accuracy hall sensor gimbal
-Mode conversion adjustments accessible without disassembly
-CNC machined gimbal pedestal
High-speed internal and external module digital interface
-Internal: 450K, External: 420K
-Super low latency (Total latency < 20ms, lowest to 12ms)
-Compatible with new lite type external modules (R9M Lite, MPM Lite, etc.)
Installed open source operating system- OpenTX
Haptic vibration alerts and voice speech outputs (Headset jack and inbuilt speaker)
Internal antenna and external antenna connector
128*64 outdoor readable backlight LCD
Smart Port, Headset jack, Micro SD card slot and Micro USB Port (*Charging function unsupported.)
Easily accessible battery compartment, uses replaceable 18500 Li-ion batteries
-Wireless function Optional
-Compatible with FrSky Free Link App
-Support wireless trainer systemNeed additional parts or order specific model

Note: The X-LITE package doesn't include battery inside. Battery Information: Flat Top / Height: 50mm / Diameter: 18mm. You can buy the battery on the local market.
Package

1 * FrSky Transmitter Taranis X-Lite Red
1 * Manual
1 * Screw Pack

3. FrSky Apus MQ-60 V2 Micro BNF FPV Drone

Description

The FrSky Apus V2 brings some nice quality of life changes in their update, as well as increased motor power. The built-in FrSky XMF3EM flight controller also supports 2 methods (automatic & manual) of the binding process for all FrSky transmitters and let you have the better control. The lightweight design, measuring 66.5mm at the wheelbase and 20g of weight means it's convenient to take anywhere. The solid frame and the strong motor protection ensure you'll stay in the air in the most demanding indoor environments.

Grab a set of Lumenier Brushed Motors to make this whoop-style quad a rocket!

Different from V1
  • Improved power performance (615mm 19000KV brushed motor)
  • Better flight control
  • Longer flight time

Features
  • FrSky XMF3E FC (Integrated with XM receiver)
  • Lightweight
  • 5 minutes of flying time
  • Support 2 binding modes (automatic and manual)
  • Solid frame and strong blade protection
  • Fly without having to adjust the parameters after binding
  • Supports parameter adjustment and the default value recovery
Specifications
  • Wheelbase: 66.5mm
  • Size: 84 x 84 x 58.5mm
  • Weight: 20g (without battery)
  • Flight controller: XMF3E (Integrated with XM receiver)
  • Firmware version: betaflight_3.3.0_frsky (can be upgraded)
  • Motor: Brushed 615 coreless (19000kv)
  • Prop Size: 31mm, 3 bladed props
  • Camera: NTSC 672X492
  • Video Transmitter: 5.8GHz 26CH 25mW
  • Battery: 3.7V 200mAh 25C LiPo battery
Needed To Complete
  • Video Goggles (For FPV Flying)
  • Radio Transmitter
Includes
  • 1 x Apus MQ60 V2
  • 1 x 3.7V 200mah 25c LiPo battery
  • 1 x USB charger
  • 1 x Manual
  • 4. FrSky RXSR-FC Omnibus F4 V6 FPV Drone Flight Controller

    Feature

    5 UART Ports
    STM32 F4 Processor
    MPU6000 Gyro via SPI
    Integrated Betaflight OSD
    More caps to reduce gyro power noise

    Description

    The FrSky RXSR-FC (OMNIBUS F4V6) uses the MPU6000 over SPI to produce stable flight performance. Integrated with the RXSR receiver mounted on-board in a protectionbox. It also features a barometer and AB7456 OSD chip for the Betaflight integrated OSD.

    The RXSR-FC (OMNIBUS F4V6) supports 3-6s Lipo direct input, and has 5 hardware UARTs.

    Features

    • RXSR Receiver
    • STM32 F4 Processor
    • MPU6000 Gyro via SPI
    • BMP280 Barometer
    • Integrated Betaflight OSD
    • 5 UART Ports
    • Direct plugin 3-6S Lipo
    • Built in LC Filter
    • 5V 1000mA BEC
    • 8V 1000mA BEC
    • More caps to reduce gyro power noise.

    Specifications

    • STM32 F405 MCU, Runs Betaflight firmware (supported from v3.2)
    • FrSky RXSR receiver in protectionbox
    • MPU6000 over SPI Bus
    • 30.5x30.5 mm mounting holes
    • Supports Lipo direct plug-in (3-6S)
    • Supports 5V 1A BEC output (Buck)
    • Supports 8V 1A BEC with LC filter output for the camera and VTX (Buck)
    • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)

    5. FrSky RXSR-FC Omnibus F4 Fireworks V2 FPV Drone Flight Controller

    Feature

    This board now has 5 UART ports
    The orientation of IMU FPC optimized
    Tantalum Capacitors can be added to the board (not included)
    Solder pads added for VTX and Camera Control (next to Video pads)
    Gyro ribbon cable redesigned to fit without extending outside the board

    Description

    The FrSky RXSR-FC (OMNIBUS F4 Fireworks) uses the ICM20608 over SPI to produce stable flight performance. Integrated with the RXSR receiver mounted on-board in a protectionbox and the ICM20608 runs perfectly under 32k Gyro loop.Also onboard are a barometer and AB7456 OSD chip for the Betaflight integrated OSD.

    The RXSR-FC (OMNIBUS F4 Fireworks) supports 3-6s Lipo direct input, built-in hall Current Sensor and Power Filter as well. The on Board PDB is tweaked by using 12-Layer PCB design. There is only 0.2-0.5 mohm internal resistance from input to each output pad.

    Specifications

    • STM32 F405 MCU, Runs Betaflight firmware (supported from v3.2)
    • FrSky RXSR receiver in protectionbox
    • ICM20608 over SPI Bus in dampening box (optional MPU6000)
    • 30.5x30.5 mm mounting holes
    • Supports Lipo direct plug-in (3-6S)
    • Built-in sensor damper
    • Supports 5V 1A BEC output (Buck)
    • Supports 8V 1A BEC with LC filter output for the camera and VTX (Buck)
    • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
    • Built-in hall Current Sensor
    • Built-in Professional Level PDB
    • More caps to reduce power noise.

    Features

    • Tantalum Capacitors can be added to the board (not included)
    • Solder pads added for VTX and Camera Control (next to Video pads)
    • The orientation of IMU FPC optimized
    • Gyro ribbon cable redesigned to fit without extending outside the board
    • Added an 8v BEC and LC Filter for the camera and VTX power
    • This board now has 5 UART ports

    6. FrSky XSRF4O OSD Flight Controller Integrate with FrSky XSR Receiver for RC FPV Racing Drone

    Feature

    Dimension: 36x36x6mm (L x W x H) with 30.5mm mounting holes
    Integrate with XSR receiver
    1~16 channels from Sbus output
    1~6 channels from PWM outputs
    S.Port enabled, support telemetry data transmission and more sensors

    Description

    Dimension: 36x36x6mm (L x W x H) with 30.5mm mounting holes
    Integrate with XSR receiver
    1~16 channels from Sbus output
    1~6 channels from PWM outputs
    S.Port enabled, support telemetry data transmission and more sensors
    OSD Configuration has been included in Betaflight GUI.
    Built-in SD slot
    Built-in F4 STM32F405 CPU
    Built-in 6-axis sensor MPU6000 (Accelerometer/Gyro)
    Built-in BARO BMP280

    7. FrSky XSRF4PO OSD PDB Flight Controller Integrate with FrSky XSR Receiver for RC Multirotor FPV Racing Drone

    Feature

    Dimension: 60x36x6mm (LxWxH) with 30.5mm mounting holes
    Weight: 14g
    1~16 channels from Sbus output
    1~ 6 channels from PWM outputs
    S.Port enabled, support telemetry data transmission and more sensors

    Description

    Dimension: 60x36x6mm (LxWxH) with 30.5mm mounting holes
    Weight: 14g
    Integrate with XSR receiver
    1~16 channels from Sbus output
    1~ 6 channels from PWM outputs
    S.Port enabled, support telemetry data transmission and more sensors
    OSD Configuration has been included in Betaflight GUI.
    Built-in SD slot
    Built-in F4 STM32F405 CPU
    Built-in 6-axis sensor MPU6000 (Accelerometer/Gyro)
    Built-in on-board PDB up to 6S integrate with current sensor

    8. FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Black

    Feature

    Quad Ball Bearing Gimbals
    Real-time Flight Data Logging
    Receiver Signal Strength Indicator (RSSI) Alerts
    Audio Speech Outputs (values, alarms, settings, etc.) (1)
    Model configuration files compatible with TARANIS X9D Plus

    Description

    This is the latest powerful radio system from FrSky, the Taranis Q X7. This is a lightweight feature packed reliable system and it comes in black or white color scheme. The radio includes a Haptic Vibration Feedback System which provides an alternative feedback system to the voice and sound alert warnings. This 16 channel radio has smooth ball bearing gimbals and is loaded with six switches and two knobs. It runs on OpenTX and files can be shared with the popular X9D Plus. The MicroSD card slot offers unlimited model memory options , it also has a USB port for upgrades and to connect to a PC for adjusting settings. Both sticks come with spring loaded return to center sticks, this makes changing from mode 1 to mode 2 extremely easy to set through the menu and the stick can quickly be set to a stationary throttle by unscrewing four screws and removing a spring. One of the best features of the Taranis Q X7 is its full telemetry capability, as well as RSSI signal strength feedback. Wheel and center enter button makes navigating the backlit menu easy and precise. Equipped with an audio jack output and trainer port as well. And of course a module bay for use with JR-type modules that can be used with other protocol receivers and with the use of a FrSky XJT module this radio can support up to 32-channels.

    Specifications:
    • Model Name: Taranis Q X7
    • Operating Voltage Range: 6~15V (2S, 3S Lipos are acceptable)
    • Operating Current: 210mA maximum (both RF module and backlit are on)
    • Operating Temperature: -10~45
    • Backlight LCD Screen: 128*64 outdoor readable LCD
    • Model Memories: 60 (extendable by SD card)
    • Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used)

    9. FrSky D4R-II 4CH 2.4Ghz ACCST FPV Receiver (w/telemetry)

    Feature

    FrSky D4R-II 4ch 2.4Ghz ACCST Receiver (w/telemetry)
    Compatible with FrSky two-way telemetry modules: DFT, DJT, DHT, DHT-U
    Lighter weight and physically smaller than D8R-II & D6FR
    RSSI (PWM) and CPPM output

    Description

    This D4R-II is a full featured mini sized 4 channel receiver by FrSky.

    What makes this receiver different the the D4FR? The D4R-II's data port allows you to connect a sensor hub so you can connect GPS, Variometer, temperature, RPM and all of the other great FrSky sensors. It also has 2 full length detachable antennas. All of this is available in a package just a little larger then the D4FR.

    Compatible with FrSky two way telemetry modules: DFT, DJT, DHT, DHT-U

    Specifications:
    • Dimension: 40*22.5*6mm
    • Weight: 5.8g / 5g (naked)
    • Operating Voltage Range: 3.5V-10.0V
    • Operating Current: 60mA
    • Operating Range: Full Range (>1.5km)
    • Resolution: 3072 (>11bit)
    Features:
    • Firmware upgradeable!
    • 2 full length antennas (replaceable)
    • One external analog telemetry port and one digital data-stream port (connect to Sensor Hub FSH-01)
    • RSSI (PWM) and CPPM output - If CH3 and CH4 are connected by a jumper, CH1 will output CPPM for CH1~CH8, and CH2 will output RSSI (PWM)
    • Lighter weight and physically smaller than D8R-II Plus & D6FR
    • Alarm warning on low voltage, poor reception, etc.
    Downloads

    Instruction Manual for D4R-II

    Firmware Upgrade Instructions

    10. FrSky V8R7-II 2.4Ghz 7CH Receiver

    Feature

    Package includes one item

    Description

    FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in the 2.4GHz band. This means that the system is completely resistant to interference in that band. Features:Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility.Easy to bind and very fast link-up. Excellent reboot time. True Diversity with two antennas.All channels can be programmed with Failsafe, quickly and easily.Quick and extremely stable in performance.Precise and smooth servo response.Extended range (1.5km-2.5km).Receiver Specification:Operating voltage: 3.0~16VPower consumption: 30mAResolution: 3072Latency: 22msNumber of channels: 7Range: 1.5km-2.5kmDimensions:33.5 x 22 x 12 mmWeight: 5.5gIncluded;1 x 7-channel receiver V8R7-II

    Conclusion

    All above are our suggestions for frsky fpv drone. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using frsky fpv drone with us by comment in this post. Thank you!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *